Entering the Driver Selection Sub-Menu
WARNING: This page is about a different car, the 2006 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
To enter the memory programming mode for your driver settings, use the following procedure:
- Be sure the ignition is either on, in ACC position, or in RAP and place the transmission in PARK (P) or the vehicle speed is less than 6 mph (9 km/h).
- Press any button on the appropriate keyless access transmitter to identify yourself as Driver 1 or Driver 2.
- Turn on the radio by pressing the power/volume knob.
- Press the CNFG radio button to enter the main menu of the radio.
- Turn the tune/select knob and scroll to SETUP.
- Press the tune/select knob to enter the SETUP menu.
- Turn the tune/select knob and scroll to DRIVER SELECTION.
- Press the tune/select knob to enter the DRIVER SELECTION sub-menu. The following items will appear:
- DRIVER 1
- DRIVER 2
- RECALL DRIVER SETTINGS
- STORE DRIVER SETTINGS
Refer to Keyless Entry System Description and Operation in Keyless Entry, Radio/Audio System Description and Operation in Entertainment and to Navigation System Description and Operation in Navigation Systems.