Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
Adaptive Cruise Module (ACM) Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Factory Reset | Auto Alignment Learn Status | The scan tool changes the adaptive cruise module (ACM) Auto Alignment Learn Status parameter from Aligned to Not Aligned. Once in the Not Aligned state, the vehicle must be driven at speeds of at least 56 km/h (35 mph) and find at least 40 acceptable targets in order to correct the auto alignment status to Aligned. |
Adaptive Cruise Module (ACM) Module Setup (Japan Only)
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| DSCC Setup (Japan Only) | Distance Sensing Cruise Control | The scan tool enables the Adaptive Cruise Module (ACM) to calibrate itself after ACM replacement. |