LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 4.6L (LH2) - Introduction (2 Of 2) >> Repair Instructions >> Engine Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of ECM
    GM931704Courtesy of GENERAL MOTORS CORP.
  1. Install the ECM (3) to the ECM bracket (4).
    2. NOTE: Refer to Fastener Notice .
  2. Install the ECM retaining fasteners (2).

    Tighten:  Tighten the ECM retaining fasteners to 3.0 N.m (27 lb in).

    3. Fig 2: View Of ECM Electrical Harness Connectors
    GM931728Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connectors (2) to the ECM (3).
  4. Install the right front wheelhouse filler panel. Refer to Wheelhouse Filler Replacement .
  5. If a new ECM is being installed, program the ECM. Refer to Control Module References .
scientia non olet · About LEMON Manuals