LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Side Impact Module Wiring Harness Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Inflatable Restraint Side Impact Module Wiring Harness
    GM513378Courtesy of GENERAL MOTORS CORP.
  1. Install the new side impact module wiring harness (3) to the seat (1).
  2. Install the retaining clips that fasten the side impact module wiring harness (3) to the seat (1).
  3. Install the side impact module (2) to the seat (1). Refer to Inflatable Restraint Side Impact Module Replacement - Front .
  4. Install the seat back panel.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling  for driver seat or SIR Disabling and Enabling  for passenger seat.
scientia non olet · About LEMON Manuals