LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Mirror Systems) >> Repair Instructions >> Power Mirror Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Route the mirror wiring harness through the hole in the mirror patch.
    Fig 1: View Of Power Mirror
    GM758769Courtesy of GENERAL MOTORS CORP.
  2. Seat the grommet (2) into the hole in the door frame.
  3. Install the mirror (1) into the door frame.
  4. Install the mirror fasteners in the following sequence:

    Tighten: 

    1. Tighten the top mirror fastener (4) to 9 N.m (80 lb in).
    2. Tighten the forward mirror fastener (5) to 9 N.m (80 lb in).
    3. Tighten the rear, lower mirror fastener (6) to 9 N.m (80 lb in).

    NOTE: Refer to Fastener Notice .
  5. Connect the power mirror electrical connector (3).
  6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
scientia non olet · About LEMON Manuals