Initialization Process
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Perform the Teach Module Process immediately after completing the Initialization Process. Failure to begin the Teach Module Process within 3 seconds of completing the Initialization Process will require the entire procedure to be repeated.
- Make sure the engine is idling and the vehicle is in park.
- Press and hold the "Sunroof Open Switch" and the "Sunshade Close Switch" together for 6 seconds.
- Release both buttons.
- Press the "Sunshade Close Switch" until the motor stalls in the close position.
- Press the "Sunroof Close Switch" until the motor stalls in the close position.