Teach Module Process

1. Run the Initialization Process above and within 3 seconds perform step 2 below.
2. Press the "Sunroof Close Switch" 3 times and hold the switch down on the third switch press.
3. Continue holding the "Sunroof Close Switch" until the sunroof and sunshade have stopped moving.*

* The sunroof has entered the teach mode at this point and the following operations will be observed:

• The sunroof and sunshade will move to the full open position.
• After the sunroof reaches the full open position, the sunroof will begin to close.
• When the sunroof reaches the half closed position, the front sunshade will close.
• The Teach Module Process is complete when both panels have stopped moving.