Teach Module Process
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Completely perform the Initialization Process, then completely perform the Teach Module Process.
Within 3 seconds of initializing the front sunroof, press the front sunroof close switch 3 times. Hold the front sunroof close switch after you press the switch for the third time. At this point, the module enters the Teach Mode.
- The front sunroof and the front sunshade will move to the full-open position.
- After the sunroof reaches the full-open position, the sunroof will begin to close.
- When the front sunroof reaches the half-closed position, the front sunshade will close.
- The rear sunshade also will open and then close.
- After the sunroof and the sunshade have fully opened and closed, the Teach Process is complete.