Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Install the front propeller shaft CV joint heat shield (2) to the vehicle.

Fig 1: Identifying Propeller Shaft CV Joint Heat Shield
Courtesy of GENERAL MOTORS CORP.
Inspect the front propeller shaft CV joint heat shield bolts (1). Replace if damaged or worn.
Install the front propeller shaft CV joint heat shield bolts (1).
Tighten: Tighten the front propeller shaft CV joint heat shield bolts to 9 N.m (80 lb in).

NOTE: Refer to Fastener Notice .
Lower the vehicle.