Windshield Wiper System Module Replacement

Fig 1: Windshield Wiper System Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the wiper arms. Refer to Windshield Wiper Arm Replacement (Flat Blade ) or Windshield Wiper Arm Replacement (Conventional) or Windshield Wiper Arm Replacement (Chevrolet Tahoe Two-mode Hybrid) . Remove the air inlet grille panels. Refer to Air Inlet Grille Panel Replacement .
1	Windshield Wiper System Module Assembly Bolt (Qty: 3) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Windshield Wiper System Module Assembly Tip: Raise the module and disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure

Windshield Wiper System Module Assembly Bolt (Qty: 3)

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Windshield Wiper System Module Assembly
Tip: Raise the module and disconnect the electrical connector.