LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Power Seat System >> Diagnostic Information and Procedures >> Memory Seat Feature Inoperative >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition ON, verify the scan tool Driver Door Switch Memory Recall Switches parameter is approximately 2.75 volts while pressing the memory 1 switch.
    • If not the specified value, refer to Memory Switch  component test. If the switch tests normal, replace the driver door switch (DDS).
  2. Verify the scan tool Memory Recall Switches parameter is approximately 1.75 volts while pressing the memory 2 switch.
    • If not the specified value, test or replace the memory switch.
  3. Verify the scan tool Memory Recall Switches parameter is approximately 1.0 volt while pressing the EXIT switch.
    • If not the specified value, test or replace the memory switch.
  4. If all circuits test normal, replace the memory seat module.
scientia non olet · About LEMON Manuals