Electronic Brake Control Module (EBCM) (JH6 Over 8600 GVW)

Fig 1: Electronic Brake Control Module (EBCM) (JH6 Over 8600 GVW) Connector End View

Courtesy of GENERAL MOTORS CORP.

Electronic Brake Control Module (EBCM) (JH6 Over 8600 GVW)

Pin	Wire Color	Circuit	Function
1	5 BK	2150	Ground
2	0.5 BN	882	Wheel Speed Sensor Signal Right Rear
3	0.5 GY/BK	7128	Wheel Speed Sensor Control Right Rear
4	0.5 GY/BK	7127	Wheel Speed Sensor Control Left Rear
5	0.5 TN	884	Wheel Speed Sensor Signal Left Rear
6	0.5 D-GN	872	Wheel Speed Sensor Signal Right Front
7	0.5 YE	6046	Steering Angle Sensor Phase A
8	0.5 TN	6048	Steering Angle Sensor Phase C
9	0.5 L-GN	6043	Steering Angle Sensor Signal
10-11	-	-	Not Used
12	0.5 L-BU	5986	Serial Data Communication Enable
13	5 RD/BK	1742	Battery Positive Voltage
14-15	-	-	Not Used
16	0.5 OG/BK	6045	Low Reference
17	0.5 GY/WH	7065	Wheel Speed Sensor Control Right Front
18	-	-	Not Used
19	0.5 D-GN	2087	12-Volt Reference
20	0.5 D-BU	6047	Steering Angle Sensor Phase B
21	0.5 L-GN/BK	6432	CAN Bus Low Serial Data
22	-	-	Not Used
23	0.5 TN	2501	High Speed GMLAN Serial Data (-)
24	0.5 TN	2501	High Speed GMLAN Serial Data (-)
25	3 BK	2150	Ground
26-27	-	-	Not Used
28	0.5 GY/WH	7064	Wheel Speed Sensor Control Left Front
29	0.5 L-BU/BK	830	Wheel Speed Sensor Signal Left Front
30	-	-	Not Used
31	0.5 GY	6044	5-Volt Reference
32	0.5 D-GN/WH	817	LED Backlight Dimming Control
33	0.5 TN/WH	6433	CAN Bus High Serial Data
34-35	-	-	Not Used
36	0.5 TN/BK	2500	High Speed GMLAN Serial Data (+)
37	0.5 TN/BK	2500	High Speed GMLAN Serial Data (+)
38	3 RD	442	Battery Positive Voltage

Connector Part Information  OEM: 13546206 Service: See Catalog Description: 38-Way F Sealed

Terminal Part Information  Pins: 1, 13 Terminal/Tray: 7116-4142-02 Core/Insulation Crimp: A/3 Release Tool/Test Probe: 12094430/J-35616-42 (RD) Pins: 25, 38 Terminal/Tray: 7116-4710-02 Core/Insulation Crimp: 4/5 Release Tool/Test Probe: 15315247/J-35616-4A (PU) Pins: 2-9, 12, 16, 17, 19-21, 23, 24, 28, 29, 31-33, 36, 37 Terminal/Tray: 7116-3703-02 Core/Insulation Crimp: 9/9 Release Tool/Test Probe: J-38125-215A/'J-35616-64B (L-BU)