LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> STS AWD V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Pressure Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oil Pressure Sensor: Service and Repair



Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure





1. Turn the ignition OFF.
2. Remove the front compartment sight shield as necessary. Refer to Front Compartment Sight Shields Replacement (Front Compartment Sight Shields Replacement) .
3. Disconnect the oil pressure sensor electrical connector.
4. Remove the oil pressure sensor.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the oil pressure sensor.

Tighten the oil pressure sensor to 20 N.m (15 lb ft).

2. Connect the oil pressure sensor electrical connector.
3. Install the front compartment sight shield as necessary. Refer to Front Compartment Sight Shields Replacement (Front Compartment Sight Shields Replacement) .


scientia non olet · About LEMON Manuals