Circuit/System Testing
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the X1 harness connector at the rear seat audio (RSA) module.
- Ignition OFF, test for less than 5 ohms between the ground circuit terminal 6 and ground.
- If less than the specified range, test the ground circuit for an open/high resistance.
- Ignition ON, test for B+ between the voltage supply circuit terminal 5 and ground.
- If less than the specified range, test the voltage supply circuit for a short to ground or an open/high resistance.
- If all circuits test normal, replace the rear seat audio module.