Component Testing
WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to SIR Caution
.
- Ignition OFF, disconnect the harness connector at the right steering wheel control switch.
- Test for infinite resistance between the signal circuit terminal 4 and the 10-volt reference terminal 2 with the switch in the open position.
- If not the specified value, replace the right steering wheel control switch.
- Test for less than 6,800 ohms between the signal circuit terminal 4 and the 10-volt reference terminal 2 with the switch in the closed position.
- If greater than the specified value, replace the right steering wheel control switch.