Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure





1. Remove the oil filter adapter. Refer to Oil Filter Adapter Replacement (Service and Repair) .
2. Remove the oil pressure sensor and/or switch from the oil filter adapter.
3. Clean and inspect the oil filter adapter. Refer to Oil Filter Adapter Cleaning and Inspection (Overhaul) .



Installation Procedure





1. Install a new O-ring on the oil pressure switch.

Notice: Refer to Component Fastener Tightening Notice (Component Fastener Tightening Notice) .

2. Install the oil pressure switch to the oil filter adapter.

Tighten the oil pressure sensor and/or switch to 16 N.m (12 lb ft).





3. Install the oil filter adapter. Refer to Oil Filter Adapter Replacement (Service and Repair) .