LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> STS V >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Configurable Customer Control System >> Diagnostic Information and Procedures >> Steering Wheel Controls Inoperative >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

  1. Ignition OFF, disconnect the harness connector at the steering wheel control switches.
  2. Test the left switch for 2,360-2,400 ohms of resistance between the ignition circuit terminal 1 and the ignition circuit terminal 5.
    • If the resistance is not within the specified range, replace the faulty switch.
  3. Test for infinite resistance between the ignition circuit terminal 1 and the signal circuit terminal 4 with the switch in the open position.
    • If less than infinite resistance, replace the switch.
  4. Test resistance values between the ignition circuit terminal 1 and the signal terminal 4 with the switch closed in each position and verify readings are approximate to what the schematic reads.
    • If values do not match, replace the switch.
scientia non olet · About LEMON Manuals