LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> STS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 947 (Programming And Setup - All Systems) >> Repair Instructions >> Liftgate Control Module Programming and Setup >> Garage Height Calibration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Garage Height Calibration

WARNING: This page is about a different car, the 2013 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

If any portion of the power liftgate assembly is replaced, repaired or disassembled, perform the following liftgate calibration procedure:

  1. Ensure that the rotary switch on the driver door panel is set to Garage.
  2. Open the liftgate to the desired height manually or by using the one of the following switches:
    • The rotary switch on the driver door panel
    • The unlatch switch on the liftgate handle
    • The remote control switch on the key fob
  3. Hold the shutface switch for at least 3 seconds with the liftgate at the desired height.
  4. Close the liftgate completely using one of the following switches:
    • The rotary switch on the driver door panel
    • The shutface switch on the liftgate
    • The remote control switch on the key fob
scientia non olet · About LEMON Manuals