Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
- Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation
.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the front ride sensor link from the upper control arm ball stud.
- Disconnect the front ride sensor harness connector.
Courtesy of GENERAL MOTORS CORP.
- Loosen the front ride sensor retaining nut.
- Gently tap the front ride sensor retaining stud in order to loosen the stud to fender connection.
- Remove the front ride sender from the vehicle.