LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 4.6L (LH2) - Introduction >> Repair Instructions >> Engine Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Using a scan tool, retrieve the percentage of remaining engine oil and the remaining automatic transmission fluid life. Record the remaining engine oil and the remaining automatic transmission fluid life.
  2. Remove the right front wheelhouse filler panel. Refer to Wheelhouse Panel Replacement - Right Side .
    3. Fig 1: View Of ECM Electrical Harness Connectors
    GM931728Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the ECM electrical harness connectors (2).
    4. Fig 2: View Of ECM
    GM931704Courtesy of GENERAL MOTORS CORP.
  4. Remove the fasteners (2) from the ECM (3).
scientia non olet · About LEMON Manuals