LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> CTS Base, 3.6 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 399 (Wiring Systems And Power Management - Component Connector End Views - Memory Seat Module X6 Through Yaw Sensor) >> Component Connector End Views >> Object Alarm Module X2 (UD7)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Object Alarm Module X2 (UD7)

WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Object Alarm Module X2 (UD7) Connector End View
GM1715212Courtesy of GENERAL MOTORS CORP.
Object Alarm Module X2 (UD7)

Pin Wire Circuit Function
1 0.35 PU 2378 Right Rear Corner Object Sensor Signal
2 0.35 D-GN 2377 Right Rear Middle Object Sensor Signal
3 0.35 OG 2376 Left Rear Middle Object Sensor Signal
4 0.35 D-BU 2374 Object Sensor Voltage
5 0.35 YE 2375 Left Rear Corner Object Sensor Signal
6-7 - - Not Used
8 0.35 GY 2379 Low Reference
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 7283-9029-40
  • Service Connector: 19115653
  • Description: 8-Way F YESC Kaizen Series (L-GY)
Terminal Part Information
  • Terminated Lead: 13575845
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P