LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> CTS Base, 3.6 V, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Pedestrian Impact Detection Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pedestrian Impact Detection Module Replacement

Fig 1: Identifying Pedestrian Impact Detection Module
GM1969850Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the instrument panel (I/P) compartment assembly. Refer to Instrument Panel Compartment Replacement (Left Hand Drive) or Instrument Panel Compartment Replacement (Right Hand Drive ) .
1 Pedestrian Impact Detection Module Bolt/Screw (Qty: 3)
CAUTION: Refer to Fastener Caution .

Tighten:  10 N.m (89 lb in)
2 Pedestrian Impact Detection Module

Procedure

  1. Disconnect the electrical connectors.
  2. Refer to Control Module References for programming and set up procedures.
scientia non olet · About LEMON Manuals