LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> CTS Base, 3.6 V, AWD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls And Fuel - 3.6L - Introduction >> Repair Instructions >> Fuel Pump Flow Control Module Replacement (Coupe)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Flow Control Module Replacement (Coupe)

Fig 1: Identifying Fuel Pump Flow Control Module
GM2187219Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Partially remove the passenger side rear compartment trim panel. Refer to Rear Compartment Side Trim Panel Replacement .
1 Fuel Pump Flow Control Module

Procedure

  1. Disconnect the electrical connector.
  2. Release the two integral retainer tabs and remove the module.
  3. If replacing the fuel pump flow control module, program the control module. Refer to Control Module References .