Installation Procedure
- Position the battery negative cable extension cable (2) to the vehicle.
- Install the Battery Cable Terminal Bolt (1).
Tighten: Tighten the bolt to 35 N.m (26 lb ft).
- Install the battery negative cable ground bolt (1).
Tighten: 20 N.m (15 lb ft).
- Install the front compartment side sight shield. Refer to Front Compartment Side Sight Shield Replacement .
- Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution
.