Side Object Sensor Replacement
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Side Object Sensor Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the bumper fascia. Refer to Rear Bumper Fascia Replacement . |
|
| 1 | Side Object Sensor Module Bolt
CAUTION:
Refer to Fastener Caution . TIP: Disconnect the electrical connectors. Tighten 9 N.m 80 lb in |
| 2 | Side Object Sensor Module |