Vehicle Direction Alert Alarm Warning Module Replacement
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY Vehicle Direction Alert Alarm Warning Module Replacement
| Callout |
Component Name |
| 1 |
Vehicle Direction Alert Alarm Warning Module Procedure
- Disconnect the electrical connector.
- Use a small flat bladed tool and insert along the top edge in the recessed notches and push in both tabs to release the upper edge of the module.
- Then slide upward to disengage the lower tabs of the module from the bracket.
- Refer to Control Module References
for set-up and programming information.
|