LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> DTS 4.6 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Wiring Systems And Power Management - Component Connector End Views - Engine Control Module X2 Through Pressure Control Solenoid) >> Component Connector End Views >> Front and Rear Object Alarm Module (UFR) X1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front and Rear Object Alarm Module (UFR) X1

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front and Rear Object Alarm Module (UFR) X1 Connector End View
GM1664569Courtesy of GENERAL MOTORS COMPANY
Front and Rear Object Alarm Module (UFR) X1

Pin Wire Circuit Function
1 0.35 RD/WH 4540 Ignition 1 Voltage
2 0.35 GY/BK 7035 Telltale Assembly Supply Voltage
3 - - Not Used
4 0.35 YE/BK 7036 Left Amber Indicator Control
5 - - Not Used
6 0.35 D-GN 5060 Low Speed GMLAN Serial Data
7 0.5 BK 750 Ground
8 - - Not Used
9 0.35 YE/WH 7037 Center Amber Indicator Control
10 0.35 TN/WH 7038 Red Indicator Control
11-12 - - Not Used
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 31410-1120
  • Service Connector: 89047364
  • Description: 12-Way F 64 Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: 13575845
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P