LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> DTS 4.6 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Wiring Systems And Power Management - Component Connector End Views - Engine Control Module X2 Through Pressure Control Solenoid) >> Component Connector End Views >> Fuel Pump and Sender Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump and Sender Assembly

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Pump and Sender Assembly Connector End View
GM684908Courtesy of GENERAL MOTORS COMPANY
Fuel Pump and Sender Assembly

Pin Wire Circuit Function
A 1 BK 1050 Ground
B 0.35 PU 1589 Primary Fuel Level Sensor Signal
C 0.35 BK/WH 651 Low Reference
D 1 GY 120 Fuel Pump Supply Voltage
Connector Part Information
  • Harness Type: Fuel Tank Jumper
  • OEM Connector: 15326632
  • Service Connector: 15306360
  • Description: 4-Way F GT 280 Series Sealed 5.8 (BK)
Terminal Part Information
  • Terminated Lead: Service by Harness- See Part Catalog
  • Release Tool: Not Available
  • Diagnostic Test Probe: Not Available
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
scientia non olet · About LEMON Manuals