Fuel Pump Flow Control Module Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Pump Flow Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the spare tire. Refer to Spare Wheel Hoist Replacement .
1	Fuel Pump Flow Control Module Fastener (Qty: 3) CAUTION: Refer to Fastener Caution Tighten: 8 N.m(71 lb in) Procedure: Partially loosen the fasteners from the slotted bracket.
2	Fuel Pump Flow Control Module Procedure Disconnect the electrical connector. If replacing, reprogram the module. Refer to Control Module References

Callout

Component Name

Preliminary Procedure:
Remove the spare tire. Refer to Spare Wheel Hoist Replacement .

Fuel Pump Flow Control Module Fastener (Qty: 3)

CAUTION: Refer to Fastener Caution

Tighten: 8 N.m(71 lb in)

Procedure:
Partially loosen the fasteners from the slotted bracket.

Fuel Pump Flow Control Module

Procedure

Disconnect the electrical connector.
If replacing, reprogram the module. Refer to Control Module References