LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> Escalade Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Power Seat System) >> Diagnostic Information and Procedures >> Power Seat Inoperative (With Memory A45) >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Driver Position Module seat switch parameters while pressing the appropriate seat switch. The reading should change between Inactive and Active.
    • If the reading does not change between the specified values, refer to the Seat Adjuster Switch Circuit Test.
  2. If all seat switch inputs to the MSM function normal, refer to the appropriate test listed below:
    • Seat Motor Control Circuit Test
    • Recline Motor Control Circuit Test
scientia non olet · About LEMON Manuals