LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> Escalade ESV AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Object Detection System) >> Diagnostic Information and Procedures >> Rear Vision Camera System Malfunction (without Navigational Radio) >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the rearview camera and verify there are no debris on the lens and that the bezel or bezel seal is not damaged.
    • If debris are found on the lens, clean the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
  2. Engine running, vehicle in PARK, verify the backup lamps are off.
    • If the backup lamps are illuminated, refer to Rearview Camera System Always On.
  3. Park brake applied, transmission in REVERSE, engine running, verify a clear rear vision image is displayed on the inside rearview mirror.
    • If a clear image is not displayed, refer to Rearview Camera System Does Not Display.