LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> Battery Inspection/Test >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: Refer to Battery Disconnect Warning .
  1. Inspect the battery for a cracked, broken, or damaged case, which may be indicated by battery acid leakage.
    • If there is any apparent damage, replace the battery.
  2. Verify the cold cranking amperage (CCA), and reserve capacity (RC) and/or amp hour (AH) rating of the battery to the original battery or original equipment (OE) specification. Refer to Battery Usage .
    • If the battery does not meet or exceed specifications, replace the battery.
  3. Verify that the battery cables are clean and tight. The battery terminal bolts should be torqued as specified in Fastener Tightening Specifications .
    • If the battery cable(s) need to be cleaned, clean as required and tighten as specified.
    • If the battery cable(s) are damaged, replace then tighten as specified.
  4. Install the J 42000  and follow directions supplied by the tester. See Special Tools .