Turn Signal Multifunction Switch Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Multifunction Turn Signal Switch & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedure Remove the steering wheel. Refer to Steering Wheel Replacement . Remove the steering column shroud. Refer to Steering Column Shroud Replacement (Without Electronic Tilt Steering) or Steering Column Shroud Replacement (With Electronic Tilt Steering) .
1	Turn Signal Multifunction Switch Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 3 N.m (27 lb in)
2	Turn Signal Multifunction Switch Procedure: Disconnect any electrical connectors as needed.

Callout

Component Name

WARNING: Refer to SIR Warning .

Preliminary Procedure

Remove the steering wheel. Refer to Steering Wheel Replacement .
Remove the steering column shroud. Refer to Steering Column Shroud Replacement (Without Electronic Tilt Steering) or Steering Column Shroud Replacement (With Electronic Tilt Steering) .

Turn Signal Multifunction Switch Bolt (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 3 N.m (27 lb in)

Turn Signal Multifunction Switch
Procedure:
Disconnect any electrical connectors as needed.