LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Configurable Customer Control System) >> Diagnostic Information and Procedures >> DTC B3622 >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the right steering wheel control switch.
  2. Test the resistance between the voltage reference terminal 3 and the signal terminal 4 while depressing the appropriate steering wheel controls switch listed below.
    • If not the specified range, replace the steering wheel switch.
Function Switch Minimum Resistance Value Maximum Resistance Value
Mute/Voice Recognition 1.0k Ohms 1.4k Ohms
Volume Down 1.3k Ohms 1.7k Ohms
Volume Up 1.7k Ohms 2.1k Ohms
Previous 2.2k Ohms 2.6k Ohms
Next 2.8k Ohms 3.2k Ohms
Source 3.6k Ohms 4.0k Ohms
Seek 5.1k Ohms 5.5k Ohms
No Switch Pressed O.L. O.L.