Trailer Brake Control Panel
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Re-adjust trailer gain any time tow vehicle and trailer loading or road surface conditions change or if you notice trailer wheel lock-up at any time while you are towing.
The trailer brake system has a control panel with the trailer gain and manual apply switches, and is located on the instrument panel to the left of the steering column. The control panel and switches allows you to adjust the amount of output, referred to as trailer gain, available to the electric trailer brakes and allows you to manually apply the trailer brakes. The Trailer Brake Control Panel, and switches is used along with the Trailer Brake Display Page on the Driver Information Center to adjust and display power output to the trailer brakes.