Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Inner Tie Rod & Jam Nut

Courtesy of GENERAL MOTORS CORP.

Loosen the jam nut on the inner tie rod (1).
Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .

CAUTION: Refer to Fastener Caution .

Install the jam nut (1) on the tie rod and tighten to 75 N.m (55 lb ft).
Check the toe setting after tightening.
Re-adjust the toe setting if necessary.