LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Antilock Brake System, Traction Control System & Stability Control System) >> Diagnostic Information and Procedures >> Stability System Caution Indicator Inoperative >> Test Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The number below refers to the step number on the diagnostic table.

  1. 2:  This step tests if the IPC is able to illuminate the stability system caution indicator during the bulb check.
Stability System Caution Indicator Inoperative

Step Action Yes No
1 Did you perform the Diagnostic System Check - Vehicle? Go to Step 2  Go to Diagnostic System Check - Vehicle
  1. Turn OFF the ignition for 5 seconds.
  2. Turn ON the ignition while observing the stability system caution indicator.
Does the stability system caution indicator illuminate?
Go to Diagnostic Aids Go to Step 3 
3 Replace the instrument panel cluster (IPC). Refer to Instrument Cluster Replacement (Cadillac) or Instrument Cluster Replacement (Except Cadillac) .
Did you complete the replacement?
Go to Step 4  -
4
  1. Turn OFF the ignition for 5 seconds.
  2. Turn ON the ignition while observing the stability system caution indicator.
Does the stability system caution indicator illuminate?
System OK Go to Step 3