Placing a Call
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
To Dial a Number
| What You Do | What You Hear |
|---|---|
| Press the white dot button | "OnStar Ready" |
| Say "Dial" | "Phone number to dial, please" |
| Say the entire phone number you wish to dial with no pauses | OnStar will repeat the number, then ask "Yes or No" |
| Say "Yes" if the phone number was correct, or "No" to try again | "Dialing," and your call will be connected |
After 3 unsuccessful tries, or if you simply like it better, you can use the "Digit Dial" command to input digits one at a time. Digit Dial is set up to dial phone numbers like previous OnStar Personal Calling Systems.
To Dial a Number Using Digit Dial
| What You Do | What You Hear |
|---|---|
| Press the white dot button | "OnStar Ready" |
| Say "Digit Dial" | "First digit to dial, please" |
| Say the number to be dialed, one digit at a time | OnStar will confirm each digit by repeating it back to you |
| When finished, say "Dial" again | "Dialing," and your call will be connected |
To Place a Call Using a Stored Nametag
| What You Do | What You Hear |
|---|---|
| Press the white dot button | "OnStar Ready" |
| Say "Call" | "Nametag, please" |
| Say (stored name) | "Calling" |
To Place a Call Using the "Redial" Command
| What You Do | What You Hear |
|---|---|
| Press the white dot button | "OnStar Ready" |
| Say "Redial" | "Redialing" |