Installation Procedure

Carefully clean the throttle body mounting surfaces of any gasket and/or seal material.

Fig 1: View Of Throttle Body

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the throttle body bolts.
Tighten: Tighten the throttle body bolts to 10 N.m (89 lb in).

Fig 2: View Of Wiring Harness Conduit

Courtesy of GENERAL MOTORS CORP.

Fig 3: View Of Throttle Body Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the throttle body electrical connector.
Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
Perform the throttle learn procedure. Refer to Throttle Learn .
Use the scan tool to clear all DTCs.