Component Testing
- Disconnect the harness connector at the right or left steering wheel control switch.
- Connect a DMM between terminal 5 and terminal 6 (left switch) or terminal 2 (right switch) of either the left or right steering wheel control switches.
- If any of the resistance measurements for the individual switches are not within the specified resistance values, replace the left or right steering wheel control switch.
Left Steering Wheel Switch Resistance
| Function Switch | Minimum Resistance Value | Maximum Resistance Value |
|---|---|---|
| Source | 787 Ohms | 987 Ohms |
| No Switch Pressed | O.L. | O.L. |
Right Steering Wheel Switch Resistance
| Function Switch | Minimum Resistance Value | Maximum Resistance Value |
|---|---|---|
| Previous | 534 Ohms | 734 Ohms |
| Next | 898k Ohms | 1.25k Ohms |
| Volume Up | 1.3k Ohms | 1.5k Ohms |
| Volume Down | 1.6k Ohms | 1.8k Ohms |
| Mute/Voice Recognition | 2.6k Ohms | 3.0k Ohms |
| No Switch Pressed | O.L. | O.L. |