Installation Procedure

Fig 1: View Of Crankshaft Position Sensor & Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Inspect the crankshaft sensor O-ring for wear or damage. If a problem is found, replace the O-ring.

CAUTION: Refer to Fastener Caution .

Install the crankshaft sensor and the retaining bolt and tighten to 10 N.m (89 lb in).
Connect the crankshaft position sensor electrical connector.
Install the intake manifold. Refer to Intake Manifold Replacement .
Perform the Crankshaft Position System Variation Learn .