Headlamp Leveling Control Module Scan Tool Information (Left)
Left Headlamp Leveling Module Scan Tool Data Parameters
| Parameter | Expected Value | Definition |
|---|---|---|
| Operating Conditions: Ignition ON | ||
| Battery Voltage | Varies | This displays Volts. This is the current battery system voltage. |
| Front Sensor | Varies | This displays % DC. |
| Low Beam Input | Varies | This displays Volts. This is the current low beam input voltage. |
| Manufacture Date | Varies | This displays the date the module was manufactured. |
| Rear Sensor | Varies | This displays % DC. |
| Stepper Motor Position | Varies | This displays Counts. This is the current position of the stepper motor measure in counts. |
Left Headlamp Leveling Module Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Calibrate Module | This command will calibrate this headlamp leveling module. |
| Headlamp Motor Test | This command will enable the left headlamp leveling motor test. |