Circuit/System Testing
WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the cellular microphone.
- Test for less than 10 Ω between the low reference circuit terminal A and ground.
- If greater than the specified range, test the circuit for an open/high resistance.
- Ignition ON, test for 9.5-10.5 V between the signal circuit terminal B and ground.
- If less than the specified range, test the circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the CIM.
- If greater than the specified range, test the circuit for a short to voltage. If the circuit tests normal, replace the CIM.
- If all circuits test normal, replace the cellular microphone.