Circuit/System Verification
WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- It is necessary to have the vehicle in an open outside area where a cellular call can be successfully placed and GPS data can be received from satellites.
- The vehicle should be located in a quiet area.
- Ignition ON, press OnStar® Call button. Verify that your voice is heard clearly by the OnStar® Call Center.
- If your voice can not be heard clearly, refer to OnStar Microphone Malfunction .
- Press the OnStar® Call answer button. Attempt to operate the OnStar® system using multiple different voice commands. Verify the system responds appropriately to all voice commands.
- If the OnStar® system does not respond to any voice commands, replace the CIM.
- If the system is operational, but does not respond appropriately to certain commands refer to OnStar Description and Operation for tips on proper pronunciation.