Circuit/System Verification
WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, verify the park assist system is enabled through the DIC.
- If the park assist system is manually disabled, enable the system. Refer to the vehicle owners manual for instructions on enabling the system.
- Transmission in REVERSE, verify one audible beep sounds and the scan tool Park Assist System Status parameter is Enable.NOTE: After completing the next step the vehicle might need to be driven at speed greater than 40 km/h (25 mph).
- If not the specified values, refer to Diagnostic Aids and the scan tool Park Assist Disable History parameters to determine the cause of the inhibit.