LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> STS Base, 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 439 (Wiring Systems And Power Management - Component Connector End Views - Memory Seat Module X6 Through Yaw Sensor) >> Component Connector End Views >> Seat Lumbar Switch - Driver (AG3 or AH5)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Lumbar Switch - Driver (AG3 or AH5)

WARNING: This page is about a different car, the 2011 GMC Acadia, 2011 Chevrolet Traverse, and 2011 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Lumbar Switch - Driver (AG3 or AH5) Connector End View
GM73146Courtesy of GENERAL MOTORS CORP.
Seat Lumbar Switch - Driver (AG3 or AH5)

Pin Wire Circuit Function
A 2 D-BU 611 Driver Seat Lumbar Motor Forward Control (AG3)
B-D - - Not Used
E 3 BK 550 Ground (A45)
F 2 PK 610 Driver Seat Lumbar Motor Rearward Control (AG3)
G 3 RD/WH 1140 Battery Positive Voltage (A45)
Connector Part Information
  • Harness Type: Driver Seat
  • OEM Connector: 12052854
  • Service Connector: 15862656
  • Description: 7-Way F Metri-Pack 280 Series (BK)
Terminal Part Information
  • Pins: A, F
  • Terminated Lead: Pending
  • Release Tool: J-38125-11A
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: Pins: A, F - 12066214/2
  • Core/Insulation Crimp: A/B
  • Pins: E, G
  • Terminated Lead: Pending
  • Release Tool: J-38125-11A
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 12015858/4
  • Core/Insulation Crimp: F/G