LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> STS V >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Vehicle Stabilizer Control Module Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

    Fig 1: View of Vehicle Stabilizer Control Module
    GM1906584Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition switch to the OFF position.
  2. Remove the left rear compartment side trim panel. Refer to Rear Compartment Trim Panel Replacement .
  3. Disconnect the stability control module electrical connectors.
  4. Release the stability control module from the module bracket locking tabs (1).
    5. Fig 2: View of Lifting Stability Control Module from the Bracket
    GM1906585Courtesy of GENERAL MOTORS CORP.
  5. Lift the stability control module (1) from the bracket and remove the stability control module.
    6. Fig 3: View of Removing Stability Control Module Bracket Nuts and Bracket
    GM1906586Courtesy of GENERAL MOTORS CORP.
  6. If necessary, remove the stability control module bracket nuts (1) and remove the bracket.
scientia non olet · About LEMON Manuals