LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> STS V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.4L - Introduction >> Repair Instructions >> Charge Air Bypass Regulator Solenoid Valve Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

    Fig 1: Identifying Supercharger Bypass Solenoid Valve Electrical Connector
    GM1614014Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the bracket and bolt (1) if previously removed. Tighten the supercharger bypass regulator solenoid valve bracket bolt to 9 N.m (80 lb in).
  2. Install the bypass regulator solenoid valve (2) to the bracket.
  3. Connect the vacuum line fittings (4, 5) to the bypass regulator solenoid valve.
  4. Connect the electrical connector (3) to the bypass regulator solenoid valve.
  5. Install the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
scientia non olet · About LEMON Manuals