LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Diagnostic Information and Procedures >> Memory Seat Feature Inoperative >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the memory seat adjuster switch.
  2. Ignition ON, verify that a test lamp illuminates between the B+ circuit terminal C and ground.
    • If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.
  3. Install a 3A fused jumper wire between the B+ circuit terminal C and the signal circuit terminal A. Verify the scan tool Memory 1 Select Switch parameter is Active.
    • If not the specified value, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the MSM.
  4. Install a 3A fused jumper wire between the B+ circuit terminal C and the signal circuit terminal B. Verify the scan tool Memory 2 Select Switch parameter is Active.
    • If not the specified value, test the signal circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the MSM.
  5. If all circuits test normal, test or replace the memory seat switch.
scientia non olet · About LEMON Manuals