LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.6L (LH2) - Introduction, Specifications & Repair Instructions >> Repair Instructions >> Ignition Coil Module Replacement - Right Side >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Ignition Coils
    GM928257Courtesy of GENERAL MOTORS CORP.
  1. Carefully install the ignition coil assembly.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the ignition coil assembly retaining bolts and tighten to 10 N.m (89 lb in).
    3. Fig 2: View Of Engine Wiring Harness & Right Ignition Coil Harness
    GM927822Courtesy of GENERAL MOTORS CORP.
  3. Reconnect the ignition coil assembly electrical connector.
    4. Fig 3: View Of Fuel Injector Sight Shield/Top Cover
    GM1272602Courtesy of GENERAL MOTORS CORP.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About LEMON Manuals